Deep-penetrating Lidocaine Topical Gel
A new formulation of deep-penetrating lidocaine circumvents the need for painful injections.
Background:
Lidocaine is a local anesthetic commonly used prior to facial medical and cosmetic procedures, as well as before dental surgery. While lidocaine is very quick and effective at numbing the treatment area to avoid pain during the procedure, the...
Published: 12/28/2023
|
Inventor(s): Anthony Di Pasqua, MENGWEI SUN
Keywords(s): Technologies, XCEED
Category(s): Campus > Binghamton University, Technology Classifications > Healthcare, Technology Classifications > Biomedical Science and Engineering
|
Electronic-ECM: A Permeable Microporous Elastomer for an
Advanced Bio-integrated Continuous Sensing Platform
Novel, self adhesive PDMS mesh inspired by the skin ECM for skin contact applications
Background:
Bio-integrated electronics are an emerging class of wearable devices capable of exploiting the native tissue’s mechanical and structural characteristics to provide an innate, seamless integration of soft electronics with biological tissue. These...
Published: 12/28/2023
|
Inventor(s): Matthew Brown, Ahyeon Koh
Keywords(s): NSF I-Corps, XCEED
Category(s): Campus > Binghamton University, Technology Classifications > Biomedical Science and Engineering
|
Treatment of L-DOPA-induced Dyskinesia in Parkinson’s Disease
Repurposed antidepressant agents for treating levodopa-induced dyskinesia in Parkinson's disease
Background:
Dopamine replacement therapy with L-DOPA remains the gold-standard treatment for the crippling movement disruptions affecting >10 million Parkinson’s Disease patients worldwide. However, L-DOPA therapies, especially after...
Published: 12/29/2023
|
Inventor(s): Christopher Bishop
Keywords(s): #SUNYresearch, #SUNYresearch, Technologies, XCEED
Category(s): Campus > Binghamton University, Technology Classifications > Biomedical Science and Engineering, Technology Classifications > Healthcare
|
Manufacturing Method for Ultra-high Solid State Capacitance Capacitors
Fabricating the dielectric of capacitors with a thin and continuous coating, providing the best trade-off of capacitance and breakdown voltage
Background:
Supercapacitors are devices with high power density, moderate energy density, and long, stable life. These properties position these devices to replace or complement batteries to store and deliver...
Published: 12/28/2023
|
Inventor(s): Tara Dhakal, James Turner, Ganesh Gudavalli, Pravakar Rajbhandari
Keywords(s): CleanTech, XCEED
Category(s): Campus > Binghamton University, Technology Classifications > Engineering
|
Additive Laser or Electron Beam Metal Deposition onto Glasses and Ceramics
Novel additive manufacturing method to bond metals onto glass and ceramic surfaces
Technology Overview:
The technology provides methods and apparatus for bonding metals onto glass and ceramic substrates, including those composed of oxides, silicides, nitrides, and carbides, carbon materials, borides, arsenides, sulfides. This method enables...
Published: 12/28/2023
|
Inventor(s): Scott Schiffres, Arad Azizi
Keywords(s): CleanTech, XCEED
Category(s): Campus > Binghamton University, Technology Classifications > Engineering
|
New Nanoink Formulation of Copper-based Nanowires with Dendrite-Like Decoration for Room-Temperature Sintering to Produce Conductive Traces on Flexible Polymeric Substrates
An air-stable and low-cost copper-based nanowire ink formulation for manufacturing wearable electronics and sensors on flexible polymer or paper substrates.
Technology Overview:
This new technology features an air-stable and low-cost copper-based nanowire ink formulation for manufacturing wearable electronics and sensors on flexible polymer or...
Published: 5/20/2024
|
Inventor(s): Chuan Jian Zhong, Shan Yan, Ning He
Keywords(s): #SUNYresearch, CleanTech, Technologies, XCEED
Category(s): Technology Classifications > Clean Energy, Technology Classifications > Electronics, Campus > Binghamton University
|
Additive Laser Metal Deposition on Carbon Materials
A novel substrate with high thermal conductivity improves powder-bed fusion metal additive manufacturing.
Technology Overview:
In current implementations of powder-bed fusion metal additive manufacturing, metal powders are directly fused to the metal substrate. To aid in the removal of the part, miniaturized truss-shaped support structures...
Published: 10/13/2021
|
Inventor(s): Scott Schiffres, Arad Azizi
Keywords(s): #SUNYresearch, CleanTech, Technologies, XCEED
Category(s): Technology Classifications > Clean Energy, Campus > Binghamton University, Campus
|
Layer-by-Layer Non-Destructive Testing of Metal 3D Printed Objects
Non-destructive testing of metal printed parts layer-by-layer during the build process, allowing for correction of voids while it is being printed
Background:
Selective laser melting has grown in popularity due to the advances in 3D printing of metal objects. It allows for layer-by-layer construction of parts that would previously have been either...
Published: 12/28/2023
|
Inventor(s): Scott Schiffres, Matthias Daeumer, Jacob Simmons, Arad Azizi
Keywords(s): #SUNYresearch, CleanTech, Technologies, XCEED
Category(s): Technology Classifications > Engineering, Campus > Binghamton University
|
Photocatalytic Nanoceramic Coatings
A novel, controlled, low-temperature process based on in-situ precipitated nanostructures grown in aqueous solution for making and non-destructively depositing functional metal oxide films on various substrates
Background:
Modifying material surfaces to enhance its properties is a common practice for a myriad of applications.
Technology...
Published: 4/13/2024
|
Inventor(s): Junghyun Cho
Keywords(s): #SUNYresearch, Technologies, XCEED
Category(s): Technology Classifications > Materials and Chemicals, Campus > Binghamton University
|